StarTech.com 2 Port USB 3.1 (10Gbps) Card – USB-A 1x External 1x Internal – PCIe USB 3.1 Card with Type-A – PCI Express – Supports UASP – Upgrade your computer to the faster speed of USB 3.1 Gen 2 by adding one external and one internal 10Gbps USB Type-A ports – 2 Port USB 3.1 (10Gbps) Card – USB-A, 1x External, 1x Internal – PCIe USB 3.1 Card with Type-A – PCI Express Host Controller CARD WITH EXT & INT PORTS 10GBPS
This USB 3.1 Gen 2 card prepares you for the next generation of USB performance, on the inside and outside of your computer. The 2-port card adds one internal Type-A connector as well as one external Type-A connector to your desktop computer, with a combined bandwidth of up to 10Gbps. For power-hungry devices, the card also has an internal SATA power connector, enabling you to use your computer’s power supply to add more power to the ports. With greater bandwidth, you can save time and avoid the performance bottlenecks that are often associated with other connectivity technologies. Connectivity on the inside and out With an internal port, you can connect internal devices that use a USB Type-A connector, such as a front-bay SD card reader. Plus, you can use the internal port to keep peripherals safely inside your computer case – perfect for high-capacity USB flash drives or interface devices used for external wire peripherals such as keyboards and mice or Bluetooth® adapters. The card also features an external port that can be used for any USB Type-A device, like your external hard drive or any wired peripheral. Faster USB performance By adding 10Gbps USB ports to your computer, you can harness the speed of USB 3.1 Gen 2 and rest assured that you’re ready for both current and future high-bandwidth USB-A devices. With higher data throughput, this PCI Express USB 3.1 card is a necessity for external hard drives, hard drive enclosures” append_qs=”filter_IOINTERFACE=USB+3.1+Gen+2, and many other USB 3.1 peripherals. Plus, the USB card integrates a SATA power connector to support high-powered devices, making it ideal for use with large external storage solutions. For more flexibility, you can couple the card with a USB-C to USB-A cable (USB31AC1M) and connect your USB Type-C™ devices. Compatible with your older USB devices Connecting your older peripherals isn’t a problem. This versatile USB 3.1 Gen 2 (10Gbps) card is backward compatible with legacy USB 3.0 and 2.0 devices that use the common USB Type-A port, so you can eliminate the added expense and aggravation of purchasing new devices. Easy to install, in virtually any Windows based PC For a hassle-free installation with no additional software or drivers required, the card is natively supported by most operating systems, and interfaces with the PCI Express 3.0 x4 slot on your computer. Plus, the high-quality card includes both standard-profile and low-profile (half-height) brackets, making it easy to install in full or small form-factor PCs or servers. The PEXUSB311EI is backed by a StarTech.com 2-year warranty and free lifetime technical support. More from the Manufacturer

Startech PEXUSB311EI

Features

Transfer files and access USB 3.1 devices faster, both inside and outside your computer case, with up to 10Gbps throughput

Fast, hassle-free setup, and natively supported by many operating systems

Fits into standard or low-profile systems, with its dual-profile design

Cost-effective backward compatibility

Compatible with high-powered USB devices, with an integrated SATA power connector

Compliant with UASP (USB Attached SCSI Protocol) Revision 1.0

Compliant with Universal Serial Bus 3.1 Specification Revision 1.0, and Universal Serial Bus Specification Revision 2.0

PCIe x4 interface compliant with PCI Express Base Specification Revision 3.0

Equipped with a full-profile bracket, includes a low-profile (half-height) bracket for installation in small form-factor computers

Guides & Documents

Brochure