StarTech.com 1m 3 ft MPO / MTP Fiber Optic Cable – Plenum-Rated MTP to MTP Cable – OM3, 40G MPO Cable – Push/Pull-Tab – MPO MTP Cable – 3.28 ft Fiber Optic Network Cable for Patch Panel, Switch, Network Device, Server, Router, Media Converter, Hub – First End: 1 x MTP/MPO Network – Female – Second End: 1 x MTP/MPO Network – Female – 40 Gbit/s – 50/125 µm – Aqua – 1 OM3 40GB PUSH/PULL TAB
This MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices. The MTP connector provides twelve times the density of an SC connector and saves circuit card and rack space. Plus, the push-and-pull tabs optimize accessibility, by letting you install or remove the connectors with one hand without using additional tools. The MTP to MTP cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is required. Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is included in each cable bag. The MPO12PL1M from StarTech.com is backed by a lifetime warranty.

Startech MPO12PL1M

Features

Interface between different networking devices at varying speeds

Optimize accessibility and install or remove connectors with one hand using the push-and-pull tabs

MTP connectors use Type A straight-through pinout

Get test data for your fiber cable – an insertion loss and return loss test report is included in each cable bag

Save circuit card and rack space with twelve times the density of SC connectors

Guides & Documents

Brochure