• Column: 1.5″ NPT
• Three ceiling mounting methods
• Flush mount without disassembly
• Convenient lamp and filter access
• Allows natural convection ventilation
• Roll Adjustment: +/-4 degrees adjustment up or down
• Compatible with the PG-1 Projector Guard Security Cage
• Allows lateral shift by adding the LSB-100 Lateral Shift Accessory
• Pitch Adjustment: +/- 25 degrees adjustment on each side of the mount
• Allows cables to be routed through the top of the mount without additional accessories
• Compatible with a large assortment of accessories to easily overcome a variety of installation challenges
• Yaw Adjustment: 360 degrees by turning the mount on the threaded column and securing in place with set screw. 12 degrees yaw possible on flush mount using slots in top of RPA

RPA Custom Inverted LCD/DLP Projector Ceiling Mount Includes:

• 1 x Bracket, Ceiling
• 1 x Bracket, Joint
• 1 x Plate, Adjustment
• 12 x Screw, Self-Tapping, Pan Head, (10-24 x 1/2″), with washer
• 1 x Screw, Set, 5/16″
• Allen Wrench
• Security Allen Wrench
• 1 x Interface Bracket
• 4 x Screw, Philips Flat Head, Machine, M6 x 16mm
• 6 x (10 – 24) Thumb Nuts
• 4 x (.625″ x .328″ x .250″) Nylon Spacers
• 1 x All-Points Security Kit

LCD/DLP Projector

UL