TUF AMD Radeon RX 6950 XT Graphic Card – 16 GB GDDR6 – 2.12 GHz Game Clock – 2.32 GHz Boost Clock – 256 bit Bus Width – PCI Express 4.0 – DisplayPort – HDMI AMD RDNA 2 PCIE 4.0 16GB GDDR6
ASUS TUF Gaming Radeon RX 6950 XT is a truly tenacious performer Factory Mode: Up to 2324 MHz (Boost Clock)/up to 2116 MHz (Game Clock) Axial-tech fan design has been enhanced with more fan blades and a new rotation scheme. Dual ball fan bearings can last up to twice as long as sleeve bearing designs. An all-aluminum shroud, reinforced frame, and metal backplate enhance durability. MaxContact heat spreader features a super flat surface for improved thermal transfer. A vented backplate prevents hot air from recirculating through the cooling array. GPU Tweak II provides intuitive performance tweaking, thermal controls, and system monitoring. BUILT TUF The TUF Gaming Radeon RX 6950 XT is a tenacious beast with a tough metal exterior, super-efficient cooling, and components that offer enhanced endurance. An all-metal shroud houses three powerful axial-tech fans with dual ball fan bearings and extra blades. Under the exoskeleton, a thick heatsink keeps thermals under tight control and TUF components, selected for maximum durability and performance, keep the card ahead of the pack. You asked for a mean machine… this one is ready for action. FANS | BIGGER, BETTER COOLING This generation, our Axial-tech fan design has matured with an increased blade count on all three fans: 13 on the center fan and 11 on the auxiliary fans. The barrier rings on the side fans have been slimmed down to allow for more lateral intake and to provide better airflow through the cooling array. The center fan’s extra blades and full-height ring provide boosted static pressure to blast air directly onto the GPU heat spreader. The fan design growth is specifically optimized for a massive new heatsink that features more fins and surface area than previous iterations. FANS | QUIET CUNNING To bolster the specialized roles of the center and auxiliary fans, the rotational direction of the center fan is reversed. This reduces air turbulence inside the cooling array for another boost to overall thermal performance. Fans will also only start spinning when the GPU temperature hits 60 Celsius and shut off when temps drop below 55 Celsius, helping to reduce noise when the system is idling or under light load. HEATSINK | MAXCONTACT To get heat up off the die and into the heatsink array, we’ve engaged MaxContact technology to polish the surface of the heat spreader and improve smoothness at the microscopic level. The extra flatness allows for better contact with the die for enhanced thermal transfer. HEATSINK | 2.9-SLOT DESIGN The heat spreader draws heat up into heatpipes that carry it through a fin stack that fills most of the card’s large, 2.9-slot footprint.
Asus TUF-RX6950XT-O16G-GA
